Gonneville Inc. Contact Info

211 Calle Pintoresco #A San Clemente, CA 92672

Phone: 949-248-7297

Web: http://gonneville.com

admin

//admin

About admin

This author has not yet filled in any details.
So far admin has created 6 blog entries.

Blast Journal Interview with Don Gonneville

Challenges and Opportunities in Abrasive Blasting Equipment Distribution: An Interview With Don Gonneville by Doug Rigby of the Blast Journal When Don Gonneville talks, you listen. He speaks with an uncommon authority. Perhaps it began back in Vietnam when he served in the special forces. Likely it was there when he [...]

By | 2016-10-19T13:22:15+00:00 May 11th, 2016|Abrasive Blasting, EcoQuip|0 Comments

Detecting Defects in Steel Surfaces

Detecting Defects in Steel Surfaces Coatings shrink as they cure, resulting in low film thickness over sharp edges and welds, which is a classic cause of coatings failure. Repairing defects is normally not part of an abrasive blaster’s job description, but when you are charged with prepping the surface it’s imperative the coating adheres [...]

By | 2016-10-19T13:22:15+00:00 May 11th, 2016|Abrasive Blasting, EcoQuip, Uncategorized|0 Comments

Choosing the Right Nozzle

Choosing the right nozzle for optimal productivity Choosing the right nozzle is the key to achieving maximum productivity with whatever air compressor you have available to you. Choose a nozzle with too small of a bore and you’ll be leaving some blasting capacity on the table. Choose a nozzle with too big of a bore [...]

By | 2016-10-19T13:22:15+00:00 January 6th, 2016|Abrasive Blasting|0 Comments

Rust Prevention

All metals corrode due to chemical reactions with the environment – with the exception of four rare metals: iridium, niobium, osmium and tantalum. When iron and iron alloys corrode we call it rusting. The product of corrosion is rust, aka hydrated iron oxide: Fe2O3.xH2O. WHY DOES RUST FORM? Oxygen (O) is a highly reactive element. Only one [...]

By | 2016-10-19T13:22:15+00:00 October 20th, 2015|Abrasive Blasting, EcoQuip, Geo-Blaster|Comments Off on Rust Prevention

Minimize Dust for Jobsite Safety

Case Study:  Paragon Restoration II OVERVIEW Paragon Restoration II is a Minnesota-based, concrete restoration company specializing in the preservation and restoration of parking structures and high-rise exterior buildings. Paragon typically sandblasts parking structures, which is their preferred cleaning method for open-air jobs, but because parking structures are largely enclosed with little to no air [...]

By | 2016-10-19T13:22:15+00:00 August 21st, 2015|EcoQuip, Equipment|Comments Off on Minimize Dust for Jobsite Safety

Vapor Abrasive Blasting: Site Containment

Containing a Site for Vapor Abrasive Blasting Uncontained emissions and debris from surface preparation operations, such as paint, coatings, paint chips and primers, can be toxic and lethal to aquatic life, can leach into the soil and be taken up by plants, bioaccumulate up the food chain and ultimately effect humans. The goal of [...]

By | 2016-10-19T13:22:15+00:00 August 21st, 2015|EcoQuip, Equipment|Comments Off on Vapor Abrasive Blasting: Site Containment