Monthly Archives: May 2016

Blast Journal Interview with Don Gonneville

By |2016-10-19T13:22:15-07:00May 11th, 2016|Categories: Abrasive Blasting, EcoQuip|

Challenges and Opportunities in Abrasive Blasting Equipment Distribution: An Interview With Don Gonneville by Doug Rigby of the Blast Journal When Don Gonneville talks, you listen. He speaks with an uncommon authority. Perhaps it began back [...]

Detecting Defects in Steel Surfaces

By |2016-10-19T13:22:15-07:00May 11th, 2016|Categories: Abrasive Blasting, EcoQuip, Uncategorized|Tags: , |

Detecting Defects in Steel Surfaces Coatings shrink as they cure, resulting in low film thickness over sharp edges and welds, which is a classic cause of coatings failure. Repairing defects is normally not part of an abrasive blaster’s job [...]

Gonneville Inc. Contact Info

211 Calle Pintoresco #A San Clemente, CA 92672

Phone: 949-248-7297

Web: http://gonneville.com